S3.7.6 Chapter 6
Levers and turning forces
How can a small child balance a bigger child on a seesaw?
Your guess
Pick one before you read on. It is fine to be wrong.
By the end you can
- Explain how a lever lets a small force lift a big load
- Balance a ruler seesaw with coins at different distances
A seesaw is a plank that turns about a middle point. A heavy child and a light child can still balance it. The trick is where each one sits.
The point a plank turns about is the pivot. A force can make a thing turn about a pivot. How strongly it turns is the turning effect.
The turning effect depends on two things. One is the size of the force. The other is how far the force is from the pivot.
In the pictures, each round cap is a bottle top. All the caps are the same, so each one has the same weight. Count each as one unit of force.
Draw it first
Draw a seesaw that balances
1 Draw a ruler resting on a pivot at its middle. It is level. Number the marks 1 to 5 on each side.
2 Put 2 caps at mark 3 on the left and 1 cap at mark 3 on the right. The left has the bigger turning effect, so it goes down.
3 Move to 3 caps at mark 2 on the right. Left: 2 × 3 = 6. Right: 3 × 2 = 6. The ruler is level.
turning effect = force × distance from the pivot. A bigger force turns more. A force farther out turns more.
A cap on mark 3 has a turning effect of 1 × 3 = 3. Two caps on mark 3 have 2 × 3 = 6. Add up every cap on a side.
A seesaw balances when the turning effects on the two sides are equal. If one side has the bigger turning effect, that side goes down.
See it three ways
As a picture
In words
One cap far from the pivot balances two caps closer in. The two sides turn just as strongly, one with more force and one with more distance.
In symbols
Left: 1 × 4 = 4. Right: 2 × 2 = 4. Equal, so balanced.
A lever is a stiff bar that turns about a pivot. A spade, a crowbar, a pair of scissors and a seesaw are all levers. The load is the thing you want to lift. The effort is the force you use.
This is why a long crowbar lifts a heavy stone. Your small push is far from the pivot. The heavy stone is close to it. A little more effort and the stone lifts.
Worked example
A ruler has 4 caps at mark 3 on the left. 3 caps go on the right. At which mark must they go to balance?
- Turning effect = number of caps × mark.
- Left: 4 caps at mark 3, so 4 × 3 = 12.
- To balance, the right side must also have a turning effect of 12.
- Right: 3 caps at some mark, so 3 × mark = 12.
- Mark = 12 ÷ 3 = 4.
- Check: 3 × 4 = 12, the same as the left side.
Answer: Mark 4
Try it
Balance a ruler seesaw
You need: a ruler or a flat stick about 30 cm long, a round pencil to be the pivot, about 10 bottle tops of one size, or coins of one size, to use as weights, a pencil for marking.
Be safe: Bottle tops and coins are small. Keep them away from very young children. Work on a table so nothing falls on your feet.
- Rest the ruler across the round pencil at its middle, so it is level. This is the pivot.
- Make a dot every 3 cm out from the middle on each side. Number the dots 1 to 5.
- Put 3 tops on the left at mark 2. Put 2 tops on the right at mark 1. The left goes down.
- Slide the 2 tops along the right side until the ruler is level. Note the mark.
- Try 3 tops on the right. Find the mark where it balances. For each, write tops × mark on both sides.
What you will see: Two tops balance at mark 3, because 3 × 2 = 6 and 2 × 3 = 6. Three tops balance at mark 2. Each time, tops × mark is the same on both sides. A small nudge may be needed, because a real ruler is not perfect.
A wrong idea many people have
The heavier side always goes down.
Why it feels right: On a seesaw with children at the ends, the heavier child usually wins.
The test that breaks it: Put 2 tops at mark 1 on the left. Put 1 top at mark 5 on the right. The right side goes down. It has less weight, but it is far from the pivot.
What is true: It is the turning effect that counts, which is force times distance. A small force far out can beat a big force close in.
Key words
- pivot
- the point a lever turns about.
- turning effect
- force × distance from the pivot.
- lever
- a stiff bar that turns about a pivot.
- effort
- the force you use to move a load.
Back to your guess
The answer is C: The small child sits farther from the middle.
A force farther from the middle has a bigger turning effect. A small child far out can balance a bigger child close in.
Check yourself
Try each one before you look. A wrong answer tells you where to go next.
A weight of 5 N hangs 20 cm from the pivot. What is its turning effect? Use N cm as the unit.
See the answer
100 N cm
Turning effect = force × distance from the pivot = 5 × 20 = 100 N cm.
The ruler rests on a block under each end. If you take the blocks away, does it stay level?
See the answer
Yes. Both sides have the same turning effect.
Left: 3 × 2 = 6. Right: 2 × 3 = 6. They are equal.
- If you chose B: You only counted the caps. The distance from the pivot matters too. Work out both turning effects. Go to S3.7.6.
- If you chose C: You only looked at the distance. The left has more caps, and the right has fewer but farther out. Work out both turning effects before you decide. Go to S3.7.6.
The ruler rests on a block under each end. If you take the blocks away, which side goes down?
See the answer
The right side goes down.
Left: 2 × 4 = 8. Right: 3 × 3 = 9. The right has the bigger turning effect.
A 6 N weight is 10 cm to the left of the pivot. A 3 N weight is on the right. How far from the pivot must the 3 N weight be to balance?
See the answer
20 cm
Left turning effect = 6 × 10 = 60 N cm. Right: 3 × distance = 60, so distance = 60 ÷ 3 = 20 cm.
- If you chose A: You put it at the same distance, as on a seesaw with equal children. This weight is smaller, so it has to make up for that. Go to S3.7.6.
- If you chose B: You moved it nearer, but a smaller force must go farther out. It needs more distance to turn as strongly. Go to S3.7.6.
- If you chose C: That number is the turning effect on the left, in N cm. It is not the distance. Divide it by the 3 N on the right. Go to S3.7.6.
Kofi uses a plank as a lever. A stone weighing 80 N sits 15 cm from the pivot. He pushes down on the other side, 60 cm from the pivot. How big a push balances the stone?
See the answer
20 N
The stone's turning effect is 80 × 15 = 1200 N cm. The push needs the same: push × 60 = 1200, so push = 20 N.
- If you chose A: You gave the weight of the stone. A push far from the pivot turns more. So it can be smaller than the weight. Go to S3.7.6.
- If you chose B: That is the turning effect of the stone, in N cm. It is not a force. Divide it by the distance of the push from the pivot. Go to S3.7.6.
- If you chose D: You swapped the distances, as if a push far from the pivot needs more force. It needs less. Multiply the weight by its own distance, then divide by the distance of the push. Go to S3.7.6.
Why does a long spoon handle help open a tin lid more than a short one?
See the answer
Your push is farther from the pivot, so it has a bigger turning effect.
The same push farther from the pivot has a bigger turning effect. A small effort can then lift the lid.
From an earlier chapter
A stone with a mass of 4 kg is the load on a lever. About what is its weight?
Keep it
Copy this into your exercise book.
Turning effect = force × distance from the pivot. A seesaw balances when both sides are equal. A lever lets a small force far from the pivot balance a big load close in.
Draw: A ruler on a pivot. 2 caps at mark 3 on the left, 3 caps at mark 2 on the right. Write 6 and 6.